4,390cc DOHC V-12 Engine
6 Weber Carburetors
352bhp at 7,500rpm
5-Speed Manual Transaxle
4-Wheel Independent Suspension
4-Wheel Disc Brakes
*Less than 30,000 miles since new
*Presented in the factory livery
*US model with factory air conditioning
*Ferrari Classiche Certified and documented by Ferrari Historian Marcel Massini
THE FERRARI DAYTONA
The concept of manufacturing a 4-cam V12-engined Berlinetta with considerably greater power output than the successful 275 GTB/4 model emerged in 1967, as soon as the 3.3-liter variant was being launched upon a receptive market. The new model would have to meet newly developed US federal regulations, which meant a tremendous amount of time-consuming development work before the new design could be introduced.
Ferrari's first known prototype for such a car emerged during the winter of 1967 with bodywork presaging the final design that would be adopted, although its front-end treatment looked back towards that of the 275 GTB. It used a three-valve per cylinder 4-liter V12 engine that was not taken further. Instead a Tipo 251 power unit would be adopted, a more conventional 4.4-liter with hemispherical combustion chambers in its twin-cam heads, and single-plug ignition. The block had been lengthened to accommodate a bore and stroke of 81mm x 71mm, identical to the Tipo 245's engine, which already powered the 365 GT 2-plus-2, GTC and GTS models.
The new 4.4-liter unit was lubricated by a dry-sump system with a 14-liter separate tank. The compression ratio was 8.8:1 and with six Weber 40DCN carburetors the engine delivered a muscular 352bhp at 7,500rpm, with 318lbs/ft. torque at 5,500rpm – enough – indeed, as one English technical writer of the time described as being "...more than enough to pull your house down".
The mechanical ensemble, comprising engine, torque tube and rear-mounted 5-speed transaxle was attached to the tube chassis at four points – two on the engine and two on the transaxle – and the familiar 2.4-meter wheelbase was retained, which dated back in unbroken line to the 250 GT SWB.
To clothe the new 365 GTB/4, Pininfarina created a classical and now legendary design, which combined Maranello tradition with modernity. Only the prototype body was actually built by Pininfarina and, as with the preceding Berlinettas, it was Scaglietti who actually made the bodies in steel (with opening panels in aluminum) for the production examples.
The venue for the new model's launch was the October 1968 Paris Salon, and its immediately successful reception saw it being nicknamed the 'Daytona' in honor of the Ferrari factory team's 1-2-3 defeat of the mighty Ford GT fleet in the 1967 Daytona 24-Hour race. Shortly after debuting the gorgeous GTS/4 Spider, a number of important revisions were introduced on both the Berlinetta and Spider versions. These changes came about as a result of the newly imposed federal safety legislation in the USA that deemed covered headlights illegal. Ferrari and Pininfarina were subsequently being forced into carrying out a mild front-end makeover. Their answer was to fit the Daytona with retractable headlights in early 1971.
Capable of achieving 278km/h (172mph) in standard form, the new Ferrari was the fastest production car in the world at that time. It also displayed the quickest acceleration when pitted against the Lamborghini Miura, Mercedes-Benz 350SL, Jaguar V12 E-Type and the De Tomaso Pantera.
THE MOTORCAR OFFERED
On July 16th, 1971, this 365 GTB/4 Daytona Berlinetta emerged from Ferrari's facility for the first time. Wearing Rosso Chiaro paintwork on its lithe Pininfarina-designed body and its sporting interior swathed in black leather, this US-specification Daytona was first sent to Luigi Chinetti Motors in Greenwich, Connecticut to be united with its first owner. According to marque expert Marcel Massini, the original owner is believed to be Mr. Robert Fergus of Westerville, Ohio. Several posts in the Ferrari Market Letter in the late 1990s specify that this Daytona was offered for sale on behalf of the first owner, still featuring its original Rosso Chiaro paint and black interior, books, tools, and just 21,000 miles on the odometer. It is believed that the first owner kept his cherished Ferrari for nearly thirty years.
By February of 2006, the car had moved to Mr. Mark Vanderkley of Atlanta, GA, by which time this powerful Ferrari had covered just 26,663 miles in 25 years. Just months before, Bo Pirkle, a well-known painter in Atlanta, Georgia was chosen to repaint this Daytona in its original Rosso Chiaro with the iconic Daytona silver nose accent it retains today. Two years later, this coupe made an appearance at the 2008 Cavallino Classic XVII Concours d'Elegance at the Breakers in Palm Beach, Florida, where it was displayed amongst other great and desirable Ferraris. This beautiful Berlinetta was acquired by the current owner in 2011.
This remarkably original Daytona presents in beautiful condition throughout; the Rosso Chiaro paint and silver nose accentuate the arrow-straight Pininfarina body with a great sheen, and the original black leather retains an even patina fitting for a car with such low mileage. Thanks to its regular servicing, the Daytona is reported to be in great working order. In late 2016, a thorough service was performed to ensure its road worthiness and performance for the new owner. Further, this Daytona is Ferrari Classiche Certified, and the Ferrari Classiche Red book will accompany this car, along with the books, tools and a comprehensive history file containing Marcel Massini's report on the car and many service and maintenance receipts.