4,390cc DOHC V12 Engine
6 Weber Carburetors
352bhp at 7,500rpm
5-Speed Manual Transaxle
4-Wheel Independent Suspension
4-Wheel Disc Brakes
*Desirable, early-production Plexi-nose Daytona Berlinetta
*Displayed at the Montreal Auto Salon when new
*Striking black over black livery
*Ferrari's front-engine V12 road car legend
*In same ownership for decades
THE FERRARI 365 GTB/4 DAYTONA
The concept of manufacturing a 4-cam V12-engined Berlinetta with considerably greater power output than the successful 275 GTB/4 model emerged in 1967, as soon as the 3.3-liter variant was being launched upon a receptive market. The new model would have to meet newly developed US federal regulations, which meant a tremendous amount of time-consuming development work before the new design could be introduced.
Ferrari's first known prototype for such a car emerged during the winter of 1967 with bodywork presaging the final design that would be adopted, although its front-end treatment looked back towards that of the 275 GTB. It used a three-valve per cylinder 4-liter V12 engine that was not taken further. Instead a Tipo 251 power unit would be adopted, which was a more conventional 4.4-liter with hemispherical combustion chambers in its twin-cam heads, and single-plug ignition. The block had been lengthened to accommodate a bore and stroke of 81mm x 71mm, identical to the Tipo 245 engine's, which already powered the 365 GT 2-plus-2, GTC and GTS models.
The new 4.4-liter unit was lubricated by a dry-sump system with a 14-liter separate tank. Compression ratio was 8.8:1 and with six Weber 40DCN carburetors the engine delivered a muscular 352bhp at 7,500rpm, with 318lbs/ft torque at 5,500rpm – enough – indeed, as one English technical writer of the time described as being "...more than enough to pull your house down".
The mechanical ensemble, comprising engine, torque tube and rear-mounted five-speed transaxle was attached to the tube chassis at four points – two on the engine and two on the transaxle – and the familiar 2.4-meter wheelbase was retained, which dated back in unbroken line to the 250 GT SWB.
To clothe the new 365 GTB/4, Pininfarina created a classical and now legendary design, which combined Maranello tradition with modernity. Only the prototype body was actually built by Pininfarina and as with the preceding Berlinettas it was Scaglietti who actually made the bodies in steel (with opening panels in aluminum) for the production examples.
Venue for the new model's launch was the October 1968 Paris Salon, and its immediately successful reception saw it being nicknamed the 'Daytona' in honor of the Ferrari factory team's 1-2-3 defeat of the mighty Ford GT fleet in the 1967 Daytona 24-Hour race. Shortly after debuting the gorgeous GTS/4 Spider, a number of important revisions were introduced on both the Berlinetta and Spider versions. These changes came about as a result of the newly imposed federal safety legislation in the USA that deemed covered headlights illegal. Ferrari and Pininfarina were subsequently being forced into carrying out a mild front-end makeover. Their answer was to fit the Daytona with retractable headlights in early 1971.
Capable of achieving 278km/h (172mph) in standard form, the new Ferrari was the fastest production car in the world at that time. It also displayed the quickest acceleration when pitted against the Lamborghini Miura, Mercedes-Benz 350SL, Jaguar V12 E-Type and the De Tomaso Pantera.
THE MOTORCAR OFFERED
Offered here is quite a special 365 GTB/4 Daytona, sporting the pure original design as Pininfarina intended, with its early Plexi-nose styling. This fantastic Ferrari, chassis no. 12923, was completed at the Ferrari factory in the fall of 1969, and was only the 88th car built in the model run. The new Daytona Berlinetta was fitted with air conditioning and destined for the Canadian market, where it would soon be displayed at the Montreal Auto Salon.
It remains unclear for how long the Plexi-nose Daytona Berlinetta remained with the first owner, but by 1986 the car was still in the Montreal area, where a Mr. Ronald Selig offered it for sale. At this point, the Ferrari had covered 45,000 kilometers, and presented in the black over black livery. The car is believed to have been exported to Sweden around this time, where it would remain until 1993. Noted Ferrari expert Lyle Tanner purchased 12923 around this time, and from him it reportedly passed to a Japanese client.
By the mid-1990's, the Daytona was back in North America, where it was offered for sale by the specialists at Emeryville, California based Fantasy Junction, with around 55,000 kilometers recorded on its odometer. The car is believed to have been in very original and unrestored condition at this point. From here, 12923 moved to the East Coast, where a Mr. Bruce Haley of Roslyn, New York owned the car in 1997, before it sold again in Monterey, California in 1998 to a collector from Oregon. The consignor, a noted Ferrari collector from Minnesota, purchased the black Daytona shortly hereafter, and it has since been part of his impressive collection, sharing garage space with a 275 GTB/4 and a 250 GT Lusso to name a few.
Today this ex-Montreal Auto Salon Daytona, one of the first 100 cars produced, presents beautifully throughout. Equipped with Borrani wire wheels and era-appropriate Michelin XWX tires, the car looks just right. Inside, one finds the early style seats unique to these early series production cars, as well as the classic wooden-rimmed steering wheel featuring the cavallino rampante on the horn button. Pure, elegant and powerful, this stunning Daytona is equally well-suited for high-speed touring or the show field.